Ditapis dengan
Steels-Micrographie Determination of the Ferritic or Austenitic Grain Size
Specifies the methods for revealing the grain and for estimating the mean size of the grain revealed. Includes a counting method (annex A) and determination of grain size by using of standard charts (annnexes B and C) taken from an AFNOR Standard and an ASTM document, respectively.
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- -
- Judul Seri
- ISO 643-1983 (E)
- No. Panggil
- -
Nuclear Power Plants-Reliability data Exchange-General Guidlines
Identifies the typical parameters of a component that permit it to be characterized unequivocally and to allow the corresponding reliability data to be associated with those of other components having equivalent typical parameters. Parameters refer to technical characteristics including the physical principle of operation and quality level and to actual operating conditions and maintenance and …
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- -
- Judul Seri
- ISO 6527-1982 (E)
- No. Panggil
- -
Operating Limits and Conditions and Operational Limits Procedures for Nuclear…
This Safety Guide provides guidance on the development, content and use of operational limits and conditions (limits on plant operating parameters) and operating procedures that affect them. It recommends how to meet the requirements established in Safety Standards Series No. NS-R-2, Safety of Nuclear Power Plants: Operation, setting out the responsibilities of the operating organization in set…
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- 52 p. : Illus. ; 24 cm
- Judul Seri
- Safety Standards Series No. NS-G-2.2
- No. Panggil
- 621.48 IAE d
Metalic Materials-Wire-Simple Torsion Test
Specifies the method for determining the ability of wire of diameter or thickness 0,3 to 10 mm inclusive to undergo plastic deformation during simple torsion. The test consists of twisting a test piece of wire around its own axis in one direction.
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- -
- Judul Seri
- ISO 7800-1984 (E)
- No. Panggil
- -
An Electron Accelerator Accident in Hanoi, Viet Nam
n 17 November 1992 a radiological accident occurred at an electron accelerator facility in Hanoi, Viet Nam. An individual entered the irradiation room without the operators' knowledge and unwittingly exposed his hands to the X ray beam. His hands were seriously injured and one hand had to be amputated. The report details the circumstances of the accident, its medical consequences and the govern…
- Edisi
- -
- ISBN/ISSN
- 9201004966
- Deskripsi Fisik
- 36 p. : Illus. ; 24 cm
- Judul Seri
- -
- No. Panggil
- 537.5 IAE a
Recommended Protice for Radiographie Examination of Fuison Welded Joints-Port…
The detection of flaws in an item submitted to X- or gamma-radiographic examination depends on the particularities of the technique employed. This part of ISO 1106 specifies general techniques of weld radiography with the object of enabling satisfactory results to be obtained economically. The techniques are based on generally accepted practice and the fundamental theory of the subject.
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- -
- Judul Seri
- ISO 1106/2-1985 (E)
- No. Panggil
- -
Neutron Reference Radiations for the Calibrating Neutron–Measuring Devices …
This part of ISO 8529 is closely related to two other standards concerning the calibration of dosimeters and dose-rate meters for neutron radiation. The first standard, ISO 8529-1 (in preparation), specifies the reference neutron radiations, in the energy range from thermal up to 20 MeV, and their production methods. The second standard, ISO 8529-2 (in preparation), describes fundamentals relat…
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- 20 p. : Illus. ; cm
- Judul Seri
- 1S0 8529 : 1989 (E)
- No. Panggil
- -
X and Gamma Referance Radiation for Calibrating Dosemeters and Doserate Meter…
This document specifies additional procedures and data for the calibration of dosemeters and doserate meters used for individual and area monitoring in radiation protection. The general procedure for the calibration and the determination of the response of radiation protection dose(rate)meters is described in ISO 29661 and is followed as far as possible. For this purpose, the photon reference r…
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- 46 p. : illus. ; 25 cm
- Judul Seri
- ISO 4037-3 : 1999 (E)
- No. Panggil
- -
Reference Beta Radiations for Calibrating Dosimeters and Dose–Rate Meters a…
-
- Edisi
- -
- ISBN/ISSN
- -
- Deskripsi Fisik
- 15 p. : illus ; cm
- Judul Seri
- ISO Standard 6980 (E)-1996
- No. Panggil
- -
Perilaku Organisasi
Perilaku perganisasi disebut organization behavior. Buku ini dipakai di fakultas ekonomi jurusan manajemen S1 atau D3. Mahasiswa S2 manajemen atau Magister Manajemen (MM) menggunakan buku ini. Fakultas psikologi juga menggunakan. Buku ini membahas perilaku orang-orang di dalam organisasai. Dapat berupa perilaku individu atau perilaku kelompok. Perilaku tersebut dapat dipengaruhi agar menuju ke …
- Edisi
- Edisi X
- ISBN/ISSN
- 9796837137
- Deskripsi Fisik
- xxix, 842 p. : illus. ; 26 cm
- Judul Seri
- -
- No. Panggil
- 658.1 ROB p
Karya Umum 
Filsafat 
Agama 
Ilmu-ilmu Sosial 
Bahasa 
Ilmu-ilmu Murni 
Ilmu-ilmu Terapan 
Kesenian, Hiburan, dan Olahraga 
Kesusastraan 
Geografi dan Sejarah